No such file to load xml mapping

If that checks out, there may be a problem with your DNS or your network. If any of these steps fails, guacd will not become a daemon, and it will log this message and exit. The reason guacd could not become a daemon will be in the previous error message in the logs. If you see this error, it likely means the user guacd is running as does not have permission to write this file. The true cause of the error will be logged in the same entry.

Check which user guacd is running as, and then check that it has write permission to the file in question. When guacd starts up, it needs to listen on the socket it just opened in order to accept connections. If it cannot listen on the socket, clients will be unable to connect.

If, for any reason, guacd is unable to listen on the socket, guacd will exit and log this message along with the cause, which is most likely a low-level system resource problem. When a client connects to guacd, it must accept the connection in order for communication to ensue. If it cannot even accept the connection, no communication between server and client will happen, and this error will be logged.

The cause of the error will be logged in the same entry. Possible causes include permissions problems, or lack of server resources. When a client connects to guacd, it must create a new process to handle the connection while the old guacd process continues to listen for new connections. If, for any reason, guacd cannot create this process, the connection from that client will be denied, and the cause of the error will be logged.

When guacd receives a connection, and it creates a new process to handle that connection, it gains a copy of the file descriptor that the client will use for communication. As this connection can never be closed unless all references to the descriptor are closed, the server must close its copy such that the client is the only remaining holder of the file descriptor.

If the server cannot close the descriptor, it will log this error message along with the cause. If guacd cannot send this instruction, this error will be logged, along with the cause.

Chances are the connection has simply been closed, and this error can be ignored. After the client plugin is finished for the time being with handling server messages, the socket is automatically flushed.

If the server cannot flush this socket for some reason, such as the connection already being closed, you will see this error. Normally, this error does not indicate a problem, but rather that the client has simply closed the connection. While the client plugin is running, guacd will occasionally ask the plugin to check and handle any messages that it may have received from the server it connected to. If the client plugin fails for some reason while doing this, this error will be logged, and the cause of the error will likely be logged in previous log entries by the client plugin.

During the course of a Guacamole session, instructions are sent from client to server which are to be handled by the client plugin. If an instruction cannot be read, this error will be logged. If the cause looks like the connection was closed end of stream reached, etc. Otherwise, if the first two numbers of the version numbers of all Guacamole components match, you have probably found a bug. This error indicates that a client plugin failed inside the handler for a specific instruction.

When the server receives instructions from the client, it then invokes specific instruction handlers within the client plugin. In general, this error is not useful to a user or system administrator. If the cause looks benign, such as reaching the end of a stream the connection closed , it can be ignored as normal. Otherwise, this error can indicate a bug either in the client plugin or in a library used by the client plugin.

It can also indicate a problem in the remote desktop server which is causing the client plugin to fail while communicating with it. During the handshake of the Guacamole protocol, the server expects a very specific sequence of instructions to be received. If the wrong instructions are received, or the connection is abruptly closed during the handshake, the above error will occur. In the case that the cause is the connection closing, this is normal, and probably just means that the client disconnected before the initial handshake completed.

If the connection was not closed abruptly, but instead the wrong instruction was received, this could mean either that the connecting client is from an incompatible version of Guacamole and thus does not know the proper handshake procedure or you have found a bug. Check whether all installed components came from the same upstream release bundle.

During the handshake of the Guacamole protocol, the server must expose all parameters used by the client plugin via the args instruction. If this cannot be sent, you will see this error in the logs.

The cause will be included in the error message, and usually just indicates that the connection was closed during the handshake, and thus the handshake cannot continue. When the client connects, it sends an instruction to guacd informing it what protocol it wishes to use. If the corresponding client plugin cannot be found or used for any reason, this message will appear in the logs.

Normally this indicates that the corresponding client plugin is not actually installed. The cause listed after the error message will indicate whether this is the case. Viewed 7k times. Add a comment. Active Oldest Votes. Execute "SampleSchema. Rasik Jain Rasik Jain 5 5 silver badges 14 14 bronze badges. SQLXMLBulkLoad is known to cause severe performance issues in scenarios of processing large amount of xml files with relatively little data in it.

The reason being it creates lot's of temporary staging tables for processing each file internally!!!. To avoid this you should merge some xml files at a time and bulkload them. Also make sure that all the files exist on your local drive. Damir Sudarevic Damir Sudarevic Jim Garrison Jim Garrison Sign up or log in Sign up using Google. Sign up using Facebook.

Storing packages in earlier versions is not supported. This occurs when the ForEach Enumerator cannot enumerate. This occurs when the ManagedHelper. SignDocument method fails. This occurs when the signature verification operation fails.

This error usually occurs when trying to sign a document using a certificate for which the person does not have the private key. The contents of the package have been modified. This error occurs when saving to Xml. The password was not specified, or is not correct. More than one precedence constraint is not allowed. The lengths must be equal. This occurs when the lengths of the arrays are mismatched. A SQL statement was issued and failed. Verify the spelling in the log provider type name.

Verify the spelling of the connection type name. This occurs when the path does not contain at least one backslash or one forward slash. The locks cannot be acquired after 16 attempts. The locks timed out. An operation was attempted that is only allowed on dispensed collections.

The Unlock method is called only once on a dispensed Variables collection. Items cannot be added to or removed from dispensed collections. A variable may only be added once to either the read lock list or the write lock list. This operation cannot be repeated. A lock could not be acquired after 16 attempts and timed out.

A lock cannot be acquired after 16 attempts. Package load will attempt to continue without the encrypted information. Use a different name to resolve this error. Check other messages for more information. Please change the SaveCheckpoints property or the TransactionOption property.

This error occurs when a task calls CreateBreakpoint with the same ID multiple times. This error occurs when a task references a breakpoint that does not exist. The file could be read-only, or you do not have the correct permissions. The result is not correctly specified. This can happen when the server or proxy URL is null, or in an incorrect format. This can happen when a scheme other than http or https is specified, or the URL is in an incorrect format. This error can occur when the server does not exist, or the proxy settings are incorrect.

Try again later. This error occurs when the login credentials provided are incorrect. Verify the login credentials. This error occurs when login credentials are not provided, or the credentials are incorrect. Cannot process the request. This error can occur when the timeout specified was too short, or a connection to the server or proxy cannot be established. A client certificate must be configured for this connection. This error occurs when the server is experiencing problems.

This error can occur when the client certificate provided was not found in the Personal Certificate Store. This error can occur when an invalid proxy was specified. You may not be authorized to access this information. Verify that the correct key is available. This error occurs when the VersionMajor, VersionMinor, or VersionBuild property of the package is set to a negative value.

It must be reloaded to complete the process. This is an internal error code. This error can occur when performing a Send or Receive operation and no files are specified for the transfer. Specify a valid local path. This can occur when the specified local path is null.

This error could occur when the certificate data is invalid. The ID of the package and the ID in the checkpoint file do not match. Remove the existing checkpoint file and try again. This error occurs when a checkpoint file exists, the package is set to not use a checkpoint file, but to save checkpoints.

This may occur if another instance of this package is currently executing. Use the EvaluateAsExpression property instead. Modify the expression to be valid. The expression was evaluated, but cannot be set on the property. The expression needs to be modified. There should be additional error messages.

Change the expression to evaluate to a Boolean value. This error occurs when the expression on the For Loop is empty. Add an expression. The version number cannot be greater than current version number. The version number is negative.

There was an error in the expression. This connection has been established under a different transaction context. This occurs when the client calls resume, but the package is not suspended. Check that the file specified in the For Each File enumerator exists. This error occurs when removing a variable that is a required variable. System variables are read-only. Event handler names are read-only. This is a system error. Variables may not change type during execution.

This occurs when a string supplied for a property value contains unprintable characters. More specific errors would have been raised explaining the exact naming problem. This occurs when a change to a read-only property is attempted. This occurs when the runtime attempts to get the type information from an object to populate the Properties collection. This error occurs when trying to retrieve the value of a property through a property object, but the property is write-only.

This error occurs when a property object or properties collection attempts to access an IDispatch interface on an object. The property type must match the variable type. This error occurs when passing an unsupported object type to a property mapping. Verify that the package path is valid. Set the destination property name.

Specify namespace-qualified name to prevent ambiguity. The destination object is not a child of any sequence container. The mapping is ignored. This occurs when the ForEach property mapping fails to restore. This occurs when the runtime is unable to resolve the name to create a task. Verify that the name is correct. Check that the file name specified is correct, and that the file exists. Further execution of the package requires a checkpoint file.

There must be a Boolean evaluation expression in the For Loop. Choose a variable that can be written to, or remove the expression from this variable. The name cannot be set to NULL. The name cannot be empty. The name cannot contain control characters that render it unprintable. Name cannot begin with a whitespace. Name cannot end with a whitespace. Name must begin with an alphabetical character.

The Validate method must succeed and indicate the result using an "out" parameter. The Execute method must succeed, and indicate the result using an "out" parameter. The task may have incorrectly implemented one of the dependency interfaces. If the value must contain a semicolon, enclose the entire value in quotes.

The package cannot execute. The package does not execute when a log provider fails validation. Verify that you have the script host installed properly.

This might prevent the task from using SSIS variables in the script. Verify that the script engine for the chosen language is installed properly. Verify that a valid function name has been specified. Verify that the script engine for the selected language is installed properly. Verify that the DTS runtime is installed. To continue, specify a valid connection.

Supply a valid connection to continue. Check the network connection. Please specify the correct data type to use for validating the value. Specify the number of seconds that the task allows the process to run. Verify that a valid FTP connection is provided.

No message has been received. Verify that the argument type is correct. Cannot overwrite the file as the Overwrite option is set to false. It cannot contain spaces, slashes, special characters, or begin with a number. Verify that a valid script language is specified. The query returned an empty result set.

Connection may not be configured correctly or you may not have the right permissions on this connection. Verify that a valid HTTP connection is specified. Verify that a valid, existing HTTP connection is specified.

Verify that a valid web service name is specified. Verify that a valid web method is specified. Verify that there is an existing web method to specify. Verify that an existing file connection or variable is specified. Verify that the variable exists in the package. Verify that the variable is not read-only. Verify that a valid connection type is specified. Verify that there is an existing file connection. Verify that the file exists. The file name is empty or the file is in use by another process.

Verify that a valid file connection is specified. The WSDL is corrupted. The input WSDL file is not valid. The ParamValue supplied does not match the ParamType. There should be at least one element in the array. Select a default value for the enumeration. The proxy that was created for the web service may not have been deleted. Please check whether the default constructor exists. Specify the value of the data type to validate. The index specified might be lesser than zero or greater than the length.

The srcDocHash attribute on the xd:xmldiff element is missing. The options attribute on the xd:xmldiff element is missing. The srcDocHash attribute has an invalid value. The options attribute has an invalid value. The rcDocHash value does not match. A new XML declaration cannot be added. FIPS User chose to fail the task if directory exists. ODBC connections don't support transactions. User defined error message ids are between and More informative error should have been raised. Check if Microsoft.

The specified format is not supported. Comparison of that data type is not supported, so it cannot be sorted or used as a key. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.

The pipeline requires too many threads as configured. Split the pipeline into multiple packages, or reduce the value of the EngineThreads property. Make sure the component view has been created. The component view may be out of synchronization. Try releasing the component view and recreating it. The thread previously reported a specific error. The usually occurs when there is an out-of-memory state. A component failed to release its interfaces. The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

There may be error messages posted before this with more information on why the thread was cancelled. Only one component view can exist at a time. The file is damaged. There was insufficient disk space. There was insufficient disk space or quota.

A read-only buffer cannot be modified. This is caused by an out-of-memory condition. There are no more IDs available to assign to objects. Detach it and try again. The system was low on memory before execution started.

It must be less than or equal to the number of columns. Make sure that the component is registered correctly. All names must be unique. There is an exclusion group that is not zero with a synchronous input that is zero. The magnitude of the literal overflows the type. To perform this operation, one or both operands need to be explicitly cast with a cast operator. The magnitude of the result of the function call overflows the type of the operand.

The operand types could not be implicitly cast into compatible types for the operation. The type of one or both of the operands is not supported for the operation. Both operands for this operator must be positive or negative. An internal error occurred, or an out-of-memory condition exists. This operand type is not supported for the operation.

An internal error occurred, or there is an out-of-memory condition. To perform this operation, the operand needs to be explicitly cast with a cast operator. Either the function name is incorrect or does not exist.

The length parameter cannot be negative. Change the length parameter to zero or a positive value. The start index value must be an integer greater than 0.

This parameter must be static, and cannot contain dynamic elements such as input columns. The requested cast is not supported.

The expression failed to parse for an unknown reason. The expression cannot be parsed. There may also be an out-of-memory error. The expression may contain invalid elements or it may not be well-formed. An attempt was made to compute or get the string of an empty expression.

The buffer manager has shut down, leaving an outstanding buffer and no cleanup will occur for the buffer. The input column specified was not found in the input column collection. The input column was not found in the input column collection. The specified token is not valid. The variable might not exist in the correct scope. The expression might contain an invalid token, an incomplete token, or an invalid element.

The code page is not installed on the machine. Scale must not exceed precision and must be positive. For the conditional operator on the specified type, the code pages must be the same. The target thread is probably shutting down.

An asynchronous output must contain output columns. An attempt was made to call AddRow or RemoveRow on a buffer that has the end of rowset flag. The specified type is not supported or is not valid. There is an error in the component. It should have reported an end-of-row.

The source type is too large for the destination type. The source type cannot be converted to the destination type. There was an internal error or an out-of-memory error. For the specified binary operator on the specified type, the code pages must be the same. The code page of the source must match the code page requested for the destination. An attempt was made to set the DefaultBufferSize property to a value that is too small or too large. An attempt was made to set the DefaultBufferMaxRows property to a value that is too small.

The desired input column must be specified uniquely as [Component Name]. Currently, the input column specified exists on more than one component. Set the OptimizedMode property to false. This must be replaced with an actual parameter or operand. The length parameter must be positive. The repeat count parameter cannot be negative. This parameter must be greater than zero.

It must be a static string. The length must be positive. The code page is not installed on the computer. Delete the path, add a new one, and attach it. The function name was recognized, but the number of parameters is not valid. Verify that SSIS is correctly installed. Verify that a connection manager in the connection manager collection, Connections, has been created with that ID. The path will not be considered for temporary storage again. Verify that the ConnectionManager. ID property of the runtime connection object has been set for the component.

The PerformUpgrade method failed. Buffers that are not used for component output do not support this operation. The type of one, or both, of the operands is not supported for the operation. The operands for this operator must be both positive or both negative.

There was an out-of-memory condition, or an internal error occurred. The operand type is not supported for the operation. An out-of-memory condition occurred, or there was an internal error. The type of the parameter cannot be implicitly cast into a compatible type for the function. Verify that the function name is correct and does exist. The start index value must be an integer greater than zero. The function name was recognized, but the number of parameters was not correct.

The parameters of NULL must be static, and cannot contain dynamic elements such as input columns. A parameter of NULL must be an integer, or a type that can be converted to an integer. This parameter must be static and cannot contain dynamic elements such as input columns. A parameter of a cast operator must be an integer, or a type that can be converted to an integer. The expression could not be parsed because it contains invalid elements.

It might contain invalid elements, or it might not be well-formed. The input column collection has not been provided to the expression evaluator, but an input column was included in the expression. It might not exist in the correct scope. The expression contains an invalid or incomplete token. The code page of the left operand does not match the code page of the right operand. The escape sequence is not supported in string literals in the expression evaluator.

The source type is too large to fit in the destination type. The source type could not be converted to the destination type. This parameter cannot be negative.

A double quotation mark may be required. The column must be qualified as [Component Name]. This should be replaced with an actual parameter or operand.

The desired variable must be qualifed as [Namespace::Variable]. Change to a positive value. Either change the code page that is specified, or install the code page on the computer. The scale that was specified is out of range for the NULL function.

Provide a valid cache file. Check SQLCommand property. The component needs to be disconnected before attempting to connect it. Make sure the flat file connection manager is configured with a connection string.

No input is allowed on this component. Make sure the Pipeline layout and all components pass validation. A connection is required when requesting metadata. Verify that the column metadata is valid. Check that the object exists in the database. A connection is required before metadata validation can proceed. Cannot insert into a row version column. Make sure your target table in the database is available. The system is out of memory or the buffer manager has reached its quota.

Error may occur when there are no file privileges or the disk is full. See previous error messages for details. The file is damaged or not a SSIS-produced raw data file. Set the WriteOption property to Create Always, or delete the file. Both properties cannot be set to TRUE. The file may be an older file format that is no longer useable.